# Xorg configuration created by system-config-display

Section "ServerLayout"
	Identifier     "single head configuration"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	InputDevice    "Synaptics" "AlwaysCore"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the 
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"       # double-buffering extension
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"       # 3D layer
	Load  "record"
	Load  "freetype"
	Load  "type1"
	Load  "synaptics"
#	Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "yes"
EndSection

Section "InputDevice"
	Identifier  "Synaptics"
	Driver      "synaptics"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "auto-dev"
	Option	    "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "LCD Panel 1680x1050"
	HorizSync    31.5 - 90.0
	VertRefresh  60.0 - 60.0
	UseModes     "16:10"
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "nvidia"
	VendorName  "Videocard vendor"
	BoardName   "NVidia Go 6600"

	# let monitor supply its own hsync and vfresh settings (need to still provide
	# defaults in "Monitor", though)
	Option      "UseEdidFreqs"  "true"

	Option      "Coolbits"  "1"

	# don't display Nvidia splash screen
	Option      "NoLogo" "true"

	# dual-display setup: display same screen on both displays
	Option      "TwinView"            "true"
	Option      "TwinViewOrientation" "clone"

	# options for dual-display with my CRT monitor
	# We don't know which is the primary display and which is the secondary. The
	# laptop screen itself is not necessarily the primary display as CRTs
	# connected are supposedly considered to be the primary display.
	# So, specify modes directly with DFP-0 (my screen) and CRT (any connected
	# CRT).
	Option      "HorizSync"    "DFP-0: 31.5 - 90.0;  CRT: 30.0 -  97.0"
	Option      "VertRefresh"  "DFP-0: 60.0 - 60.0;  CRT: 50.0 - 180.0"
	Option      "MetaModes"    "DFP-0: 1680x1050, CRT: 1280x1024; DFP-0: 1400x1050, CRT: 1024x768"

	# options for dual-display with TV set
	#Option      "TVStandard"        "NTSC-M"
	#Option      "TVOutFormat"       "SVIDEO"
	#Option      "HorizSync"    "DFP-0: 31.5 - 90.0;  TV: 30.0 - 50.0"
	#Option      "VertRefresh"  "DFP-0: 60.0 - 60.0;  TV: 60.0 - 60.0"
	#Option      "MetaModes"    "DFP-0: 1680x1050, TV: 800x600; DFP-0: 1400x1050, TV: 800x600"

	# Warning: Problems when all 3 combined--must uncomment either CRT or TV
	# above and restart X (ctrl-alt-bksp)
	# specify each pairing of resolutions between LCD, CRT, and TV
	#Option      "HorizSync"    "DFP-0: 31.5 - 90.0;  CRT: 30.0 -  97.0; TV: 30.0 - 50.0"
	#Option      "VertRefresh"  "DFP-0: 60.0 - 60.0;  CRT: 50.0 - 180.0; TV: 60.0 - 60.0"
	#Option      "MetaModes"    "DFP-0: 1680x1050, CRT: 1280x1024; DFP-0: 1400x1050, CRT: 1024x768; DFP-0: 1680x1050, TV: 800x600; DFP-0: 1400x1050, TV: 800x600"

EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes    "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1680x1050" "1400x1050" "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "Modes"
	Identifier "16:10"
	#Modeline "1280x800" 107.21 1280 1360 1496 1712 800 801 804 835
	#Modeline "1280x800" 123.38 1280 1368 1504 1728 800 801 804 840
	#Modeline "1280x800" 147.89 1280 1376 1512 1744 800 801 804 848
	Modeline "1680x1050" 147.14 1680 1784 1968 2256 1050 1051 1054 1087
	#Modeline "1680x1050" 188.07 1680 1800 1984 2288 1050 1051 1054 1096
	#Modeline "1680x1050" 214.51 1680 1800 1984 2288 1050 1051 1054 1103
	#Modeline "1680x1050" 256.20 1680 1808 1992 2304 1050 1051 1054 1112

	# 1280x800 @ 60 Hz (GTF) hsync: 49.68 kHz; pclk: 83.46 MHz	
	Modeline "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828

	# 1680x1050 @ 60 Hz (GTF) hsync: 63.84 kHz; pclk: 144.02 MHz	
	Modeline "1680x1050" 144.02 1680 1784 1968 2256 1050 1051 1054 1064
EndSection

# Sections for TV display: must execute 'X :1 -layout tv' to use;
# can toggle between TV and LCD with ctrl-alt-f7 and ctrl-alt-f8
#Section "ServerLayout"
	#Identifier     "tv"
	#Screen      0  "Screen_TV" 0 0
	#InputDevice    "Mouse0" "CorePointer"
	#InputDevice    "Keyboard0" "CoreKeyboard"
	#InputDevice    "Synaptics" "AlwaysCore"
#EndSection

Section "Screen"
	Identifier "Screen_TV"
	Device     "Card_TV"
	Monitor    "TV"
	DefaultDepth     16
	SubSection "Display"
		Depth     16
		Modes    "800x600" "640x480"
	EndSubSection
EndSection

Section "Monitor"
	Identifier   "TV"
	HorizSync    30.0 - 50.0
	VertRefresh  60.0
EndSection

Section "Device"
	Identifier  "Card_TV"
	Driver      "nvidia"
	VendorName  "Videocard vendor"
	BoardName   "NVidia Go 6600"
	Option      "TVStandard"       "NTSC-M"
	Option      "TVOutFormat"      "SVIDEO"
	Option      "ConnectedMonitor" "TV"
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection